Outboard parts SUZUKI DT150TCL K3 2003
- Model DT150TCL K3
- Name DT150TCL K3
- Year 2003
- Power 150 hp
- Stroke 2
-
Cylinder head
(DT150(S)/200); NOTE : COLOR : 0ED (GRAY), 0EP (BLACK) REFER TO FIG.2(B-3) FOR DT225
-
Cylinder head
(DT225); NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Cylinder
(DT150(S)/200); NOTE : REFER TO FIG.4 (B-5) FOR DT225
-
Cylinder
(DT225)
-
Crankcase
(DT150(S)/200); NOTE : REFER TO FIG.6 (B-7) FOR DT225
-
Crankcase
(DT225)
-
Under housing
NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Crankshaft
-
Inlet case
(DT150(S)/200); NOTE : REFER TO FIG.10(B-12) FOR DT225
-
Inlet case
(DT225)
-
Throttle body
(DT150(S)/200); NOTE : REFER TO FIG.12(C-3) FOR DT225
-
Throttle body
(DT225)
-
Exhaust cover
-
Vapor separator
(DT150(S)/200); NOTE : REFER TO FIG.15(C-6) FOR DT225
-
Vapor separator
(DT225); NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Fuel injector
(DT150(S)/200); NOTE : REFER TO FIG.17(C-8) FOR DT225
-
Fuel injector
(DT225)
-
Fuel pump
(DT150(S)/200); NOTE : REFER TO FIG.19(C-11) FOR DT225
-
Fuel pump
(DT225)
-
Oil pump
(DT150(S)/200); NOTE : REFER TO FIG.21 (D-3) FOR DT225
-
Oil pump
(DT225)
-
Water pump
-
Throttle link
(DT150(S)/200); NOTE : REFER TO FIG.24(D-6) FOR DT225
-
Throttle link
(DT225)
-
Opt : gasket set
(DT150(S)/200); NOTE : REFER TO FIG.76(K-6) FOR DT225
-
Opt : gasket set
(DT225)
-
Clamp bracket
NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Swivel bracket
NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Tilt cylinder
-
Manifold ptt
-
Engine holder
-
Lower cover
NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Engine cover
(DT150); NOTE : COLOR : 0ED (GRAY) REFER TO FIG.56 (H- 6) FOR DT150TC MODEL:02,03 REFER TO FIG.57 (H- 7) FOR DT150STC REFER TO FIG.58 (H- 9) FOR DT200 REFER TO FIG.59 (H-10) FOR DT225 REFER TO FIG.60 (H-11) FOR DT225 MODEL:02,03
-
Engine cover
(DT150TC MODEL:02,03)
-
Engine cover
(DT150STC); NOTE : COLOR : 0ED (GRAY), 291 (BLACK)
-
Engine cover
(DT200); NOTE : COLOR : 0ED(GRAY), 019(BLACK) 1RR(GOLD), 28V(RED) A8M(019/1RR/28V/0ED)
-
Engine cover
(DT225); NOTE : COLOR : 0ED (GRAY), 019 (BLACK) 1RR (GOLD), 28V (RED) A8M (019/1RR/28V/0ED)
-
Fuel hose
-
Tie rod linkage spindle zincated yello
-
Remote control
-
Opt:top mount single
(1)
-
Opt:top mount single
(2)
-
Opt:top mount single
(1)
-
Opt:top mount single
(2)
-
Opt:concealed remocon
(1)
-
Opt:concealed remocon
(2)
-
Optional
-
Clutch shaft
-
Shift rod
-
Transmission
-
Exhaust manifold
-
Drive shaft housing
NOTE : COLOR : 0ED (GRAY), 0EP (BLACK)
-
Gear case
-
Starting motor
(MODEL:98,99); NOTE : COLOR : 0ED (GRAY) REFER TO FIG.29 (E-3) FOR MODEL:00~03
-
Starting motor
(MODEL:00~03)
-
Magneto
(DT150(S)/200); NOTE : REFER TO FIG.31 (E-5) FOR DT225
-
Magneto
(DT225)
-
Relay / control equip
(DT225)
-
Ignition coil
(DT150(S)/200); NOTE : REFER TO FIG.34(E-8) FOR DT225
-
Ignition coil
(DT225)
-
Rectifier
(DT150(S)/200); NOTE : REFER TO FIG.36(E-10) FOR DT225
-
Rectifier
(DT225)
-
Harness
(DT150(S)/200); NOTE : REFER TO FIG.38(F-3) FOR DT225
-
Harness
(DT225)
-
Switch volt change
-
Injection unit
(DT150(S)/200); NOTE : REFER TO FIG.41(F-6) FOR DT225
-
Injection unit
(DT225)
-
Ignition control
(DT225)
-
Sensor/meter
(DT150(S)/200); NOTE : REFER TO FIG.44 (F-9) FOR DT225
-
Sensor/meter
(DT225)
-
Ptt motor
-
Oil tank
(DT150(S)/200); NOTE : REFER TO FIG.64(I-5) FOR DT225
-
Oil tank
(DT225)
-
Opt:meter
-
Opt:panel switch
-
Opt : trim switch